Specifications - SoundCraft Si3 User Manual

Frequency Response
Mic input to Line output
Stereo input to master output
T.H.D. & Noise
10Hz-22kHz Mic In (min gain) to Bus output
Mic In (max gain) to Bus output
Stereo input to master output
Mic Input E.I.N.
22Hz-22kHz bandwidth, unweighted
Residual Noise
Master output; no inputs routed, Mix fader @0dB
CMRR
Sampling Frequency
Convertor Resolution
Latency
Mic Input to Bus output
DSP Resolution
Internal Clock
Accuracy
Jitter
Input & Output Levels
Mic Inputs
Stereo Inputs / Returns
Bus Outputs
Nominal Operating Level
Input & Output Impedances
Mic Inputs
All other analogue Inputs
Line Ouptuts
Oscillator
Filters
Channel HP Filter
Channel LP Filter
Soundcraft® Si3 User Guide
+0/-1dB, 20Hz – 20kHz
+0.5/-0.5dB, 20Hz – 20kHz
<-126dBu (150 Ohm source)
20Hz to 20kHz Sine/Pink Noise, variable level
22Hz-1kHz, 18dB per octave
500Hz-20kHz, 18dB per octave

SPECIFICATIONS

0.006% @ 1kHz
0.008% @ 1kHz
0.005% @ 1kHz
<-88dBu
80dB @ 1kHz Mic input
48kHz
24 bit
< 1ms @48kHz
40-bit floating point
< +/- 50ppm
< +/- 5ns
+26dBu max
+28dBu max
+22dBu max
0dBu (-22dBFS)
6.8 kOhms
>10 kOhms
<75 Ohms
Page 7 - 1