Both Rows Mode - SoundCraft Si3 User Manual

Both Rows mode

BUS SENDS button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected input fader channel
to place another channel onto the encoders in both the Upper and Lower rows.
The SEL buttons in the associated input fader bay will illuminate and will track the selection made using the
CHANNEL SCROLL buttons.
OUTPUT PROCESSING button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected output channel to
place another channel onto the encoders in both the Upper and Lower rows.
The SEL buttons in the associated output fader bay will illuminate and will track the selection made using the
CHANNEL SCROLL buttons.
BUS TO MATRIX button selected
The CHANNEL SCROLL buttons allow the user to navigate away from the currently-selected matrix output in
order to place another matrix output onto the encoders in both the Upper and Lower rows.
If the MTX/MAST button is selected, the SEL buttons in the associated output fader bay will illuminate and
will track the selection made using the CHANNEL SCROLL buttons.
Note! When in Both Rows mode, the CHANNEL SCROLL buttons next to the upper and lower row of
encoders are linked in their operation.
Soundcraft® Si3 User Guide Page 4 - 13