Cue Control Buttons; Store; Recall; Next - SoundCraft Si3 User Manual

CUE CONTROL BUTTONS

STORE

Pressing this button will create a snapshot at the end of the Cue list.

RECALL

PREV
Pressing this will cause the console's controls to be set according to the information
STORE
MODE
recalled from the highlighted cue in the cue list. The highlighted cue is adjusted
using the ADJUST encoder.
RECALL

NEXT

Pressing this will recall the information from the next cue in the cue list.
NEXT

PREVIEW MODE

This function is not yet implemented.

ISOLATING INDIVIDUAL CHANNELS AND BUSES FROM RECALL

Individual Channels and Buses can be stopped from receiving recalled data by using the ISOLATE function.
For channels, the isolate button is located in the channel function buttons group. Pressing this button will
isolate the channel whose SEL button is active. It doesn't matter if the input bay is in Channel Mode or Global
Mode.
For output buses, the isolate control is located via the OUTPUT PROCESSING button in the BOTH ROWS
section. The isolate button is below the fourth soft button from the left of the top row of encoders. Pressing
this will isolate the bus whose SEL button is active.
Soundcraft® Si3 User Guide Page 6 - 3