Specifications - SoundCraft Ui24R User Manual

Ui24R User Manual
INTRODUCTION > SAFETY
SOUNDCRAFT Ui TYPICAL SPECIFICATIONS
• Frequency Response
20Hz-20kHz +/- 0.5 dB
• THD
Mic input (Min gain to bus) @ 1kHz <0.005%
Mic input (Max gain to bus) @ 1kHz <0.008%
• Noise
Residual Noise -96dBu
Mic Input E.I.N.22Hz-22kHz unweighted:
-128dB EIN
• Input Gain
Mic/Line Gain -6dB to +58dB (Step accuracy
depends on size of fader in GUI)
• Gate
Threshold -inf to +6dB
Attack 1ms to 400ms
Release 5ms to 2000ms
Hold 1ms to 2000ms
Depth -inf to 0dB
• Compressor
Threshold -90dB +6dB
Ratio 1:1 - 50:1
Attack 1ms - 400ms
Release 10ms - 2000ms
Makeup Gain -24dB - +48dB
• EQ Channel
4 band parametriq EQ
Each Band Freq 20Hz to 22kHz
Q .05 - 15
Gain -20dB to +20dB
HPF 20Hz to 1kHz (selectable slopes)
LPF 22kHz to 1kHz (selectable slopes)

1.3: SPECIFICATIONS

• De-esser
Threshold -90dB to 6dB
Ratio infinity to 1:1
Frequency 2kHz to 15kHz
• EQ Outputs
31 band GEQ, 20Hz - 20KHz +-15dB
• Compressor outputs
Threshold -90dB +6dB
Ratio 1:1 - 50:1
Attack 1ms - 400ms
Release 10ms - 2000ms
Makeup Gain -24dB - +48dB
• dbx® AFS on all outputs
12 parametric EQ's (6 fixed, 6 floating)
• Latency
All Processing ON for inputs and outputs 3.2ms
• Input and Output Levels
Mic Input +19.5dBu max
Line input +19.5dBu max
Mix output +20.5dBu max
Headphone outputs 500mW 1 output used
(@120Ω), 380mw both outputs used
• Input and Output Impedances
Mic input 1-2 4.2kΩ input 3-20 6kΩ
Line Input 12kΩ
Hi-Z Input >600kΩ
Balanced Outputs <150Ω
• USB
Max Current 500mA
Max Current available to all ports: 900mA
• Power
Consumption (typical) < 65W
AC input voltage range 88-265VAC auto sensing
AC frequency 47-63Hz
• Operating Conditions
Temperature range 5°C - 40°C
Humidity 0%-90%
Storage Temperature -20°C to 60°C
E & OE.Soundcraft reserves the right to change
specifications and or images in this manual with-
out notice.
1.3: SPECIFICATIONS