Lower Row Buttons - SoundCraft Si3 User Manual

LOWER ROW Buttons

There are 4 buttons in the Lower Row section
The tables on the right give a summary of the data displayed by the Lower Row of data windows.
INPUT DYN The lower row of encoders in the output master section function as a dynamics processing
section for any selected input channel fader. The ID of the selected input channel is displayed
in the left-most display window.
OUTPUT DYN The lower row of encoders in the output master section function as a dynamics processing
section for any selected output channel fader. The ID of the selected output channel is
displayed in the left-most display window.
The OUTPUT DYN and MATRIX SENDS buttons cannot be selected at the same time.
MATRIX SENDS The first 8 encoders in the lower row of the output master section function as level
send controls to Matrix Outputs 1-8. The signal is sourced from any selected output bus (1-
12/13-24) by pressing the appropriate SEL button in either the 1-12 or 13-24 fader banks.
The ID of the selected source bus is displayed in the left-most display window.
Note: the INPUT DYN and either the OUTPUT DYN or MATRIX SENDS buttons may be selected at the
same time, however, only one will be active
(illuminated orange)
output section. Any SEL button in the input or output fader areas may be selected - in which case the
associated INPUT DYN, OUTPUT DYN or MATRIX SENDS button will be reactivated.
VCA MASTER The lower row of encoders in the output master section function as VCA Master fader 1-12.
The VCA MASTER button when activated has priority over previous selections. Any previously
selected button(s) will be de-selected. VCA Master mode may be exited by deselecting the
VCA MASTER button, in which case the INPUT DYN, OUTPUT DYN and MATRIX SENDS buttons
will revert to their previous states.
Note: Selecting a button in the Both Rows section will make the selected buttons in the Upper and
Lower Row sections extinguish.
Page 4 - 8
(illuminated green)
depending on whether the most recently pressed SEL button is in an input or
, the other will be in 'primed' mode
Soundcraft® Si3 User Guide