CHANNEL MODE (VCS)
In this mode all of the encoders and tops of the status windows are used together to display and change
data for one selected channel. This collective function is called the Virtual Channel Strip (VCS).
The VCS concept can probably be best explained by comparison to a typical analogue channel strip as shown
below. In this example the EQ controls of channel 6 are highlighted. This corresponds to the SEL button of
channel 6 being active, and the EQ button from the Channel Mode options being selected.
EQ
The highlighted controls in the analogue equivalent above represent what will be displayed on the VCS, which
is displayed to the right of it, the VCS has been rotated through 90° to make the comparison more complete.
Soundcraft® Si3 User Guide
Page 3 - 5