Specifications - SoundCraft mini Stagebox 32i User's Installation Manual

MINI STAGEBOX 32i TYPICAL SPECIFICATIONS
Frequency Response
Signal path: Stagebox Mic input to Stagebox line output, 4dBu input signal, 4dB input Mic gain. 20Hz – 20kHz
+0.5dB /- 0.5dB
THD & Noise
Signal path: Stagebox Mic In (at minimum gain, -5dB) to Stagebox Line Output.
Measurement is taken with 8dBu, 1kHz input signal, 20Hz – 20kHz filters applied, unweighted.
0.004%
Signal path: Mic In with 50dB gain to Stagebox Line Output
Measurement is taken with -40dBu, 1kHz input signal20Hz – 20kHz filters, unweighted.
<0.02%
THD Only
Signal path: Stagebox Mic In (at minimum gain, -5dB) to Stagebox Line Output.
Measurement is taken with 8dBu, 1kHz input signal, 20Hz – 20kHz filters applied, unweighted.
0.002%
Signal path: Mic In with 50dB gain to Stagebox Line Output
Measurement is taken with -40dBu, 1kHz input signal20Hz – 20kHz filters, unweighted.
<0.015%
Mic Input E.I.N.
Mic input is fitted with 150 Ohm Termination jack. Signal is routed to console AES output.
Measurement is taken with 22Hz – 22kHz bandwidth, unweighted.
Input signal of -40dBu.
Max Gain = (Output level (dBFS) + clip point in dBu) – Input level (dBu))
E.I.N = Max Gain – (noise floor(dBFS) + clip point in dBu)
126dBu
Residual Noise (Noise floor)
Master output; no inputs routed, Mix fader @0dB
<-87dBu
Crosstalk
10dB input gain, -22dBu 10kHz input signal, Adjacent channels
<-80dB
15
Soundcraft Mini Stagebox 32i User/Installation Guide 0514