OUTPUT FADERS
The Output Faders are used for mixing the levels of Output Busses 1-24, Matrix Outputs 1-8 and the Left,
Right and Centre Master Outputs.
VCA groups are also controlled from the Output Channel faders.
Output Layers
The Output Faders Select buttons are located to the right hand side of the output fader bay and are used to
define what function is assigned to the output faders. These buttons illuminate when active.
There are four interlocked buttons.
1-12
13-24
MTX/MAST
VCA
Page 2 - 4
This button selects the output faders to be master level controls for bus outputs
1-12.
This button selects the output faders to be master level controls for bus outputs
13-24.
This button selects the output faders to be master level controls for Matrix
Outputs 1-8 and the Left, Right and Centre busses.
This button selects the output faders to be master level controls for the VCA
groups 1-12.
Soundcraft® Si3 User Guide