Rear Connector Panel - SoundCraft Si3 User Manual

REAR CONNECTOR PANEL

The console has modular rear connector panels. The Analogue-to-Digital and Digital-to-Analogue converters
are contained in the rearcon modules. Each console has one master-section rearcon panel and four channel-
section modules.
The master-section rearcon module has the following connectors:
Master Outputs (Right, Left & Centre)
Monitor Outputs (Right, Left & Centre)
4 sets of Stereo Line inputs
8 Insert Points
Headphones Socket
Talkback Mic (with 48V Phantom Power) (XLR),
Talkback External input
MIDI IN OUT & THRU connectors
HiQnet™ connector
Each channel-section rearcon module has the following connectors:
16 Mic/Line Input connectors and 8 Bus Output connectors, all on XLRs.
Page 2 - 6
(XLRs),
(XLRs),
(3-pole Jacks),
(3-pole Jacks, 2 each),
(3-pole Jack),
(XLR),
(each a 5-pin DIN connector),
(XLR-housed EtherCon).
Soundcraft® Si3 User Guide