Calibration Test; G5 Settings - AMX Modero G5 Instruction Manual

Settings Menu

Calibration Test

The Modero X Series G5 panels are self-calibrated on startup. The Calibration Test page (FIG. 24) may be used to verify
the accuracy of that calibration.
FIG. 24 Calibration Test menu
To run a calibration test on the touch panel:
1.
In the Settings menu, select Display.
2.
In the Display page, select Calibration Test.
3.
Touch the screen to test the calibration.
In order to ensure a correct calibration upon starting, the touch panel display should
not be touched while the panel is booting.
4.
For options when testing the calibration of the touch panel, select Options to open the Calibration Test Options
window (FIG. 25). Click Fade to cause the cursor to fade away after touching, or click it again to retain all touches
on the display screen. Click Clear to clear the memory of previous touches. When finished, select Exit to return to
the Calibration Test page.
FIG. 25 Calibration Test Options window
5.
When finished with the calibration test, select Exit to return to the Display page.

G5 Settings

The G5 Settings page (FIG. 26) controls both the panel's transmission of page flip tracking to the Master and the panel's
active duration before going into Sleep mode.
FIG. 26 G5 Settings page
16 Modero G5 Touch Panels - Configuration and Programming
Scroll down
to see all
G5 Settings
menu items