G5:Sensor; G5:Settings; G5:Setup; G5:Touch - AMX Modero G5 Instruction Manual

SSH Commands (Cont.)

g5:sensor

g5:settings

g5:setup

g5:touch

g5:version

g5:ver

Modero G5 Touch Panels - Configuration and Programming
Sensor commands.
Syntax:
G5:sensor [options] sensor
Arguments:
sensor
Target sensor <motion|light>
Options:
--help
Display this help message.
-calibrate, -c
Calibrate light sensor.
-enable, -e
Enable.
-thresh, -t
Threshold.
Display the panel settings.
Syntax:
G5:settings [options] [category]
Arguments:
category
Settings category to display (all, status, sound, master, config, sensors, ethernet)
Options:
--help
Display this help message.
--info, -?
Display the current settings.
Launch the panel settings utility.
Syntax:
G5:setup [options]
Options
--help
Display this help message
Touch panel overlay self test and diagnostics.
Syntax:
G5:touch [options] [watchEnable]
Arguments
watchEnable
Optional 'on'/'off' to enable/disable persistent diagnostics watching.
Options
--help
Display this help message
--watchTime, -w
Time interval for watching overlay diagnostics in seconds (default is 1).
Display the G5 version.
Syntax:
G5:version [options]
Options:
--help
Displays this help message
SSH Commands
117