Netlinx - AMX Modero G5 Instruction Manual

Settings Menu
FIG. 37
Hostname window
2.
Enter the new hostname and press OK.
The new hostname will now appear in the Hostname field.

NetLinx

The NetLinx page (FIG. 38) controls the method of connection to a NetLinx Master.
FIG. 38 NetLinx page
NetLinx page options
Scan for Masters
Mode
System Number
Master IP/URL
Master/Port Number
Username
Password
24
Click this button to open the Master Connection window (page 25).
Cycles between the connection modes: URL, Listen, and Auto.
• URL - Enter the IP/URL, Master Port Number, and username/password (if used) on the Master.
The System Number field is read-only - the panel obtains this information from the Master.
• Listen - Add the panel address into the URL List in NetLinx Studio and set the connection
mode to Listen. This mode allows the Modero touch panel to "listen" for the Master's
communication signals. The System Number and Master IP/URL fields are read-only.
• Auto - Enter the System Number and a username/password (if applicable). Use this mode
when both the panel and the NetLinx Master are on the same Subnet.
The Master IP/URL field is read-only.
Allows entry of a system number. Default value is 0 (zero).
Note: Available in Auto Mode Only - disabled when URL or Listen is selected.
Sets the Master IP or URL of the NetLinx Master.
Note: Available in URL Only - disabled when Listen or Auto is selected.
Allows entry of the port number used with the NetLinx Master. Default = 1319.
If the target Master has been previously secured, enter the alpha-numeric string (into each field)
assigned to a preconfigured user profile on the Master.
This profile should have the predefined level of access/configuration rights.
If the target Master has been previously secured, enter the alpha-numeric string (into each field)
assigned to a preconfigured user profile on the Master.
This profile should have the predefined level of access/configuration rights.
Modero G5 Touch Panels - Configuration and Programming
Scroll down
to see all
NetLinx
menu items