Apf; Bsf; Bsm - AMX Modero G5 Instruction Manual

Programming - Send Commands
Button Commands (Cont.)

^APF

^BSF

^BSM

72
Add page flip action.
Add page flip action to a button. This command installs a page flip command to the Button Release event
action.
Syntax:
"'^APF-<vt addr range>,<page flip action>,<page name>
[,<animation>,[origin],[duration]]'"
Variables:
variable text address range = 1 - 4000.
page flip action = (see the following):
Stan[dardPage] - flip to standard page
StanAni - flip to standard page with animation
PrevAni - flip to previous page with animation
Prev[iousPage] - flip to previous page
Show[Popup] - Show popup page
Hide[Popup] - Hide popup page
Togg[lePopup] - toggle popup state
ClearG[roup] - clear popup page group from all pages
ClearP[age] - clear all popup pages from a page with the specified page name
ClearA[ll] - Clear all popup pages from all pages
Page Name: 1 - 50 ASCII characters.
Animation: See the ^AFP command (page 71) for details.
Origin: See the ^AFP command (page 71) for details.
Duration: Transition time in 10ths of a second. Range is 3-30 with 15 (1.5 seconds) as the default
Example:
SEND COMMAND Panel, 'APF-400,StanAni,Main Page,ZoomIn,30'
Add animated page flip action to button 400 to flip to Main Page using zoom in for 3 seconds.
Button Focus Command.
Note: Select one button at a time (single variable text address). Do not assign a variable text address range to
set focus to multiple buttons. Only one variable text address can be in focus at a time.
Syntax:
"'^BSF-<vt addr range>,<selection value>'"
Variable:
variable text address range = 1 - 4000.
selection value = Unselect = 0 and select = 1.
Example:
SEND_COMMAND Panel,"'^BSF-500,1'"
Sets the focus to the text area of the button.
Button Submit Text Command.
This command causes the text areas to send their text as strings to the NetLinx Master.
Syntax:
"'^BSM-<vt addr range>'"
Variable:
variable text address range = 1 - 4000.
Example:
SEND_COMMAND Panel,"'^BSM-500'"
Returns a String of format "'<button name>-<text>'". The string is returned on the port a ^BIT
command was received on, or if that has not occurred, is sent on the address port.
Modero G5 Touch Panels - Configuration and Programming