Configuring The Touch Panel To Accept Multi Preview Signals; Nfc - AMX Modero G5 Instruction Manual

Settings Menu

Configuring the Touch Panel To Accept Multi Preview Signals

1.
In the Multi Preview page, press the Enable button to enable the panel to receive information from the device.
2.
If the device is connected, the remaining information on the Multi Preview page will self-populate as the touch
panel receives that information from the device.
If the device is not connected to the touch panel at this time, any attempts at enabling
the device will fail, and the Multi Preview page will be blank other than the Enable
button. If an MXA-MP or MPL is not connected to the touch panel, the Enable button
MUST be disabled to prevent network conflicts.

NFC

The NFC page (FIG. 46) controls the touch panel's Near Field Communications™ (NFC) access, as well as displaying
the last NFC tag read by the device.
FIG. 46 NFC page
NFC page options
Enable/Disable:
Last Tag Read:
For more information on the NFC capabilities of your panel, please refer to the
Operation Reference Guide to the touch panel in question. These Operation
Reference Guides are available at www.amx.com.
30
Click this button to enable or disable NFC functionality.
Displays the last-read NFC tag ID.
Modero G5 Touch Panels - Configuration and Programming