Debug; Echo; Logout; Exit - AMX Modero G5 Instruction Manual

SSH Commands
SSH Commands (Cont.)

debug

echo

logout

exit

quit

g5:cache

g5:config

116
View/set debug level for 'msg' logging . An interactive menu is available when using the set proxy (i.e.
"set debug").
Syntax:
*:debug [options] [action]
Arguments:
action: enable or disable mode action to perform
'enable', 'on': enable debug mode.
'disable','off': disable debug mode.
Options:
--config, -c, --set
Set the debug level.
--disable, -d, --off, -F
Disable debug mode.
--enable, -e, --on, -N
Enable debug mode.
--help
Display this help message
--info, -?
Display the current debug level.
Echoes or prints arguments to STDOUT.
Syntax:
*:echo [options] [arguments]
Arguments:
arguments
Arguments to display separated by whitespaces.
Options:
--help
Display this help message.
--newline, -n
Do not print the trailing newline character.
Terminate the command shell session.
Syntax
*:logout
Cache command - dump or purge cache contents.
Syntax
G5:cache [options]
Options:
--help
Display this help message.
-purge
Purge.
-verbose, -v, -vb
Verbose.
Display configuration information for NetLinx and IP.
Syntax:
g5:config [options]
Options:
--help
Display this help message.
--info, -i
Return configuration info.
Modero G5 Touch Panels - Configuration and Programming