Nmx-Enc H.264 Encoder - Encoder Settings For G5 Panels - AMX Modero G5 Instruction Manual

Appendix C: Video Streaming Troubleshooting

NMX-ENC H.264 Encoder - Encoder Settings for G5 Panels

The Modero X Series® G5 line of touch panels can receive video streams from the NMX-ENC H.264 Encoder
(FG3201-01), provided that the Encoding settings on the NMX-ENC are configured correctly. Encoding settings for the
NMX-ENC are set via the on-board WebConsole interface.
Due to resource constraints, the number of playing video streams on a G5 panel is
limited to two (720dpi, 30fps). If two or more video streams are requested to play, only
the latest two streams with different url will be started.
The WebConsole is accessed via a web browser on a PC that has network access to the encoder. You can access the
WebConsole by entering the IP address of the encoder into a web browser. (see the NMX-ENC H.264 Encoder
Instruction Manual for details).
The NMX-ENC H.264 Encoder should be configured such that:


To view / set Encoding options, open the NMX-ENC WebConsole to the Encoding tab.
Note that by default, Frame Decimation is set to "None" (FIG. 1).
FIG. 1 NMX-ENC WebConsole - Encoding tab
To use the NMX-ENC with X Series G5 touch panels, change the Frame Decimation setting from "None" (the default
setting) to "1/2" (via the drop-down menu).
132
Maximum resolution for video windows: 720dpi
Maximum frame rate for video windows: 30fps
Modero G5 Touch Panels - Configuration and Programming