Wke; Shutdown; Webu - AMX Modero G5 Instruction Manual

Panel Commands (Cont.)

^WKE

SHUTDOWN Power Off the Panel Command.

WEBU

Modero G5 Touch Panels - Configuration and Programming
Panel Wakeup Command.
Place the panel in wake state. Wake state turns the display on.
Syntax:
"'^WKE'"
Variables: None
Example:
SEND COMMAND Panel,"'^WKE'"
Wakes the panel from sleep (turn display on)
Receipt of this command will cause the panel to power off.
Example:
SEND COMMAND Panel, 'SHUTDOWN'
Update Firmware from URL Command.
This command tells the panel to retrieve a firmware kit file from the included URL and update to the
firmware included in that kit file.
Syntax:
"'WEBU-<url>'"
Variable:
url = URL to the kit file. Support protocols are HTTP only at this time.
Example:
SEND_COMMAND PANEL,"'WEBU,http://file.server/MODEROX-G5-firmware.kit'"
Download and install the MODEROX-G5-firmware.kit file from the HTTP server file.server.
Programming - Send Commands
65