Accessories - Whirlpool ATE0743SPP Technical Manual

PART NUMBER
4396585
4396586
4396591
4396595
4396587
4396594
4396592
4396590

ACCESSORIES

DESCRIPTION
WALL SLEEVE:
• G-90 zinc coated steel is prepared in an
eleven-step process, then electrostatically
coated with a polyester finish, and cured
in an oven for exceptional durability.
• The wall sleeve is insulated for thermal
efficiency. 16" H x 42" W x 13-3/4" D.
STANDARD GRILLE:
• Stamped aluminum.
• Anodized to resist chalking and oxidation.
ARCHITECTURAL LOUVERS:
• Heavy-gauge 6063-T5 aluminum alloy.
• Clear, extruded aluminum.
• Dark bronze acrylic enamel.
• Also available in custom colors.
CONDENSATE DRAIN KIT:
• Attaches to the bottom of the wall sleeve
for internal draining of condensate or to
the rear wall sleeve flange for external
draining.
• Recommended on all units to remove
excess condensate.
• Packaged in quantities of ten.
DEEP WALL SLEEVE EXTENSION:
• 4" deep anodized aluminum extension
that attaches to the outside of the wall
sleeve when the wall is thicker than 13"
thick (11-3/4" when a subbase is used,
12-3/4" when a lateral duct is used).
DECORATIVE SUBBASE:
• Provides unit support for walls less than
6" thick.
• Includes leveling legs, side filler panels
and mounting brackets for electrical
accessories.
• Accepts a circuit breaker, power discon-
nect switch, or conduit kit.
DESK CONTROL KIT:
• A field installed kit which allows the unit to
be turned On or Off from a remote loca-
tion.
8-2
PHOTO