Whirlpool ATE0743SPP Technical Manual page 87

PART NUMBER
4396597
4396593
4396583
4396600
4396601
ATXFT0
Additional Components:
4396598 Disconnect Switch: Installed in the subbase and provides a means for disconnect-
4396602 Front Cover Side
Mount Kit:
DESCRIPTION
CONDUIT KIT WITH JUNCTION BOX:
• Makes field wiring connections for direct
wired 265V PTAC/PTHPs.
• Kit includes a means of quick-disconnect
for easy removal of the chassis.
• It can be used with or without a subbase.
DIGITAL REMOTE THERMOSTAT:
• A Honeywell wall-mounted remote ther-
mostat. Requires a single stage cooling
and heating thermostat.
SLEEVE EXTENSION RETROFIT KIT:
• G-90 zinc coated steel, 2.4" sleeve
extension attached to the room-side of the
sleeve to allow for the installation of a
P-Series unit.
LATERAL DUCT ADAPTER:
• Attaches to the PTAC/PTHP unit and
provides a transition to direct up to 35% of
the total CFM to a secondary room, either
left or right of the unit.
• Kit includes duct plenum with a discharge
grille.
LATERAL DUCT EXTENSION:
• A three foot insulated plenum that at-
taches to the left or right side of the duct
adapter.
• The extension can be cut to length by the
installer.
REPLACEMENT FILTER PACK:
• Original equipment return air filters.
• Reusable and can be cleaned by vacuum-
ing or washing.
ing power to the PTAC/PTHP.
Modifies the method of attaching the front cover when the
PTAC/PTHP is mounted close to or against the floor.
8-3
PHOTO