5
Specifying the transmission report printing conditions
You can specify the conditions for printing a transmission report (TX Report).
The printing conditions for a transmission report are preset with the Report
Settings parameters from the Administrator Management screen. Select the
appropriate printing conditions.
Settings can be specified for the following.
Setting
Default
ON
If TX Fails
OFF
To specify the transmission report printing conditions
1
Touch [Menu].
–
If the optional fax kit has been installed, touch [FAX Menu].
SCANReady
One-Touch Search
JPN
Tokyo Osaka Nagoya Fukuok
Job List
5-16
Description
Displays the printing conditions specified in the Administrator
Management screen.
Prints regardless of the results.
Prints when the transmission failed.
Does not print regardless of the results.
Fine
Direct
Quality&
Input
Reduction
IndexList
US
a
Center
Center
1
2
Memory
Free
Chain
Menu
100%
Scan to SMB
200/250/350