Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual page 39

2
Reminder
If the [Utility/Counter] key was pressed to register items and specify set-
tings, be sure to press the [Reset] key in the control panel after returning
to the initial screen.
To specify initial network settings
1
Press the [Utility/Counter] key.
2
Touch [Admin. Management].
Utility/Counter
User
Setting
Admin.
Management
Printer
Setting
3
Type in the administrator password using the keypad, and then touch
[Enter].
– "12345678" is registered at the factory.
– To change the administrator password, refer to the User's Guide
[Copy Operations].
Input Administrator Code.
Utility/Counter
Administrator Code
2-6
Exit
User
Total
Management
Counter
Total Copy
Reports
Counter
Total
Copy Size
Check
Detail
Memory
100%
Free
Cancel Enter
Memory
Free
357
285
5
100%
Setup
200/250/350