Ldap Server Setting (Administrator Mode) - Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

Specifying settings using PageScope Web Connection
8.17

LDAP Server Setting (Administrator mode)

If LDAP searches are enabled, the LDAP server to be accessed can be reg-
istered. Up to 5 LDAP servers can be registered in this machine.
For details on the LDAP search methods, refer to "Searching the destination
information from the server" on page 7-2.
Reminder
If "LDAP" is not set to "Enable", the LDAP server information cannot be
registered. To register the LDAP server information, be sure to set
"LDAP" to "Enable".
If "LDAP Server Setting" is clicked, settings can be specified for the follow-
ing.
Item
LDAP Server
Name
LDAP Server
Address: IP
Address
LDAP Server
Address: Host
Name
SSL/TLS
Port Number
Search Base
Connection
timeout
Maximum
number of
Search
Authentication
Setting
Domain Name
Login Name
Password
[Check
connection]
200/250/350
Description
Enter the LDAP server name. Up to 16 characters can be entered.
Specify the IP address of the LDAP server.
Enter the LDAP server host name. Up to 64 characters can be entered.
Select whether to perform SSL/TLS encryption of the sent data.
Type in the port number (between 1 and 65535) used to communicate with the
LDAP server.
Specify the location on the LDAP server where searches are to be started. Up
to 255 characters can be entered.
Type in the time (between 5 and 300 seconds) when a search is timed out.
Type in the maximum number of hits (between 5 and 100) to be received as
LDAP search results.
Select the LDAP authentication method.
Specify a setting when "Authentication Setting" is set to "Active Directory".
Up to 64 characters can be entered.
Specify a setting when "Authentication Setting" is not set to "Anonymous".
Up to 64 alphanumeric characters and symbols can be entered, excluding ^.
Specify a setting when "Authentication Setting" is not set to "Anonymous".
Up to 32 alphanumeric characters and symbols can be entered, excluding ^.
Click to use the entered settings and check the connection to the LDAP
server.
8
8-65