9
Specifying switching of the SMTP server (mode 371)
Two SMTP servers can be registered for Scan to E-Mail and Internet fax op-
erations. The SMTP server will be switched when a transmission error oc-
curs.
Factory settings
Bit
Setting
Specifying settings
The shaded cells indicate the factory settings. The page numbers on the right
side refer to the descriptions for the corresponding function.
Bit
7, 6, 5
4
3, 2, 1, 0
9-46
7 6 5 4 3 2 1 0
0 1 0 0 0 0 0 0 (HEX: 40)
Description
-------
Specifies operation of
the SMTP server.
-------
Specifying management settings
Setting
Description
010
*Do not change these bits
when specifying settings for
this function.
0
The SMTP server is not
switched when an error oc-
curs.
1
The SMTP server is
switched when an error oc-
curs.
0000
*Do not change these bits
when specifying settings for
this function.
Page Ref-
erence
-------
page 2-20,
page 8-69
-------
200/250/350