Specifying Settings For Address Input And Broadcast Transmissions (Mode 018) - Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

9
Specifying settings for address input and broadcast transmissions
(mode 018)
Select whether or not recipients can be specified by directly entering their
address, and select whether or not broadcast transmissions are permitted.
Factory settings
Bit
Settings
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7, 6, 5, 4
3
2
1, 0
*1
Prohibited when bit 6 of software switch setting mode 477 is set so that
the settings can only be specified in Administrator mode
9-34
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 1 (HEX: 01)
Description
----------
Specifies whether or not a
destination can be speci-
fied by directly entering its
* 1
address.
Specifies whether or not
broadcast transmissions
are permitted.
----------
Specifying management settings
Setting Description
0000 *Do not change these
bits when specifying set-
tings for this function.
0 Permitted
1 Prohibited
0 Permitted
1 Prohibited
01 *Do not change these
bits when specifying set-
tings for this function.
Page
Reference
----------
----------
----------
----------
200/250/350