Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual page 46

Setup
3
Use the keypad to type in the IP address.
– You cannot specify an IP address that begins with 0, 127, or 224 or
higher.
When less than three digits are entered, use [→] to move the cursor
–
to the next number.
nter Gateway.
Utility/Counter
Gateway
4
Touch [Enter].
Network Board Set
Settings can be specified for the following.
Item
Auto
100M-Full
100M-Half
10M-Full
10M-Half
200/250/350
Cancel
192.168.100.30
Delete
Memory
Free
Description
Selects the transmission speed automatically by auto-negotia-
tion.
Manually specifies a transmission speed of 100 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
Manually specifies a transmission speed of 100 Mbps in half-
duplex mode when the transmission speed cannot be selected
automatically.
Manually specifies a transmission speed of 10 Mbps in full-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
Manually specifies a transmission speed of 10 Mbps in half-du-
plex mode when the transmission speed cannot be selected au-
tomatically.
nter
100%
2
2-13