Specifying The Transmission Settings; Com. Mode - Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

8

Specifying the transmission settings

1
In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
– For the procedure to log on to Administrator mode, refer to "Log-
ging on to Administrator mode" on page 8-8.
2
Click [TX Settings].
3
Specify settings for each parameter, and then click [Apply].

Com. Mode

Select whether or not each communication mode can be used.
1
In the Administrator mode, click the Scan tab.
– If the optional fax kit has been installed, click the Fax/Scan tab.
2
Click [TX Settings].
3
Click [Com. Mode].
4
Specify a setting for each parameter, and then click [Apply].
8-44
Specifying settings using PageScope Web Connection
200/250/350