Specifying Use Of Registered User Authentication Information To Log On To The Ldap Server (Mode 466) - Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

9
Specifying use of registered user authentication information to log on to
the LDAP server (mode 466)
Specify whether or not user names and passwords registered with user au-
thentication are used to log on to the LDAP server.
Factory settings
Bit
Setting
Specifying settings
The shaded cells indicate the settings selected during production.
Bit
7
6, 5, 4, 3,
2, 1, 0
!
Detail
The information for the LDAP server to be connected to must be regis-
tered in order to use the LDAP server. In addition, when LDAP and user
authentication are synchronized, select "Active Directory" as the user au-
thentication method. Select "GSS-SPNEGO" as the LDAP authentication
method. For details on the user authentication method, refer to the User's
Guide [Copy Operations]. For details on the LDAP authentication meth-
od, refer to "LDAP Setting" on page 2-44 or "LDAP (Administrator mode)"
on page 8-64.
9-50
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description
Specifies whether or not the
user name/password used
for external server authenti-
cation is used to log on to
the LDAP server.
-----------------------------
Specifying management settings
Setting Description
0 Not used for logon
1 Used for logon
0000000 *Do not change these bits
when specifying settings for
this function.
Page
Refer-
ence
---------
---------
200/250/350