Specifying Transmission Report Settings (Tx Settings); Specifying The Quality/Mode Settings - Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual

9
9.3

Specifying transmission report settings (TX Settings)

You can specify the default settings for transmission.
Settings can be specified for the following.
Item
Quality/Mode
Default Quality
Default Density
Communication Mode
Comm. Menu
TSI
Rotation TX
2-Sided TX

Specifying the Quality/Mode settings

1
Enter Administrator mode, and then touch [Admin. 1].
2
Touch [TX Settings].
Utility/Counter
Administrator Management 1
Initial
Setting
Account/
User Auth.
TX Settings
Print Lists
9-6
Description
Specify the quality default value that is reset after an operation
is completed.
Specify the density default value that is reset after an operation
is completed.
Specify the communication mode default value that is reset af-
ter an operation is completed. Select from PC (e-mail) or Inter-
net FAX (Internet FAX).
Select the transmission source name.
OFF: Does not attach the transmission source name.
Inside Body Text: Prints the transmission source name on the
original document.
Outside Body Text: Does not print the transmission source
name on the original document.
Specify whether to reset the rotation transmission after an op-
eration is completed.
Specify whether to reset the duplex transmission after an oper-
ation is completed.
Enter
Admin.Set
RX Settings
Report
Document
Settings
Management
Memory
Free
Specifying management settings
100%
200/250/350