Danfoss ERC 102 Reference Manual page 6

Door sensor connector cable: please see Appendix II
for lengths and code numbers .
NOTE: Door sensor: is optional and is a connector
and cable with spade terminals compatible with door
contacts used in refrigeration applications.
Light sensor: is optional and is used to measure the
level of ambient light around the cabinet so
that night and day (Economy / Normal) modes
of operation can automatically be set, as well
as the brightness of the display .
Power plug: for laboratory use, low quantity
OEM production or whenever spade connectors are
not available .
Clips: are used to secure the ERC 102 in place in
the case of rear mounting . They are not used with
front mounting . There are two identical clips, one
placed on either side of the ERC 102 . See Chapter 4
– Mounting – for further details .
6 ERC 102 Reference manual – 2 CONTENT OF THE BOX