Controlling/Navigation; Koolprog And Gateway; Docking Station; Manual Operation With Buttons (Direct Access) - Danfoss ERC 102 Reference Manual

5. CONTROLLING / NAVIGATION AND ACCESS LEVELS
The ERC 102 can be controlled in three ways:
using KoolProg software, the Danfoss Docking
Station or manually by means of the buttons
on the front panel .
5.1 KoolProg/Gateway
KoolProg is licenced Danfoss software offering easy
parameter setup via a USB gateway . This software
is supplied separately; for technical literature and
further information, please contact your local
Danfoss representative .

5.2 Docking station

The ERC 102 controller docking station is supplied
separately . For further information, please contact
your local Danfoss representative .
5.3 Manual operation with buttons
(Direct Access)
Danfoss ERC 102
Explained as follows:

ERC Front and Button Functionallity:

5 .3 .1 ERC Front and Button Functionallity
1 Press: Variable direct function, e.g.ECO/Night mode
1 Click: Variable direct function, e.g.ECO/Night mode
Sub function: Back
Sub function: Back
1 Click: Variable direct function, e.g. light
Hold 3 sec: Menu
1 Press: Variable direct function, e.g. light
Sub function: OK
Sub function: OK
14 ERC 102 Reference manual – 5 CONTROLLING / NAVIGATION AND ACCESS LEVELS
1 Press: Temperature setpoint
Sub function: Up
1 Click: Temperature setpoint
Sub function: Up
1 Click: Temperature setpoint
Sub function: Down
1 Press: Temperature setpoint
Sub function: Down