Record Track Mapping - CB ELECTRONICS SR-3 User Manual

Only available tracks for each machine may be mapped, the available tracks are determined by the
following:-
MENU 40:- Record Tracks
0=Off 1=Alg 2=8 3=16 4=24 5=32 6=40 7=48
MENU 41:- Analogue and Video Rec Rdy
0= Disable 1= A1-A2 2= A1-A2+V 3=Asmb
The following menu may be used to determine the default settings for menu 41 for video machines
Setup | Root | Unit | Record | Menu 14:- Default Alg and Vid Rdy
The mapping of the record track arming keys is determined by the setting of menu 07 as follows:-
MENU 07:- Track Arm Keys
0= System, 1= Mcn, 2= Enabled, 3= Macro
The track arm keys have three modes of operation as follows:
0= System
The track arming keys may access any combination of tracks and machines across the system. The
Track Arming keys may be programmed individually (enter Mcn:Track followed by [Shift] followed by
[Store] followed by Track arm key) or the tracks from the currently enabled machines may be mapped
across the record keys by depressing [Record] and [track arm key 1].
1= Mcn
The track arming keys follow the current selected machine. The keys are mapped automatically to the
available tracks per machine as defined above.
2= Enabled
Track arming keys will follow the last selected record enabled machine. The keys are mapped
automatically to the available tracks per machine as defined above.
3= Macro
Track arming keys will follow machines selected by special macro keys, Depressing one of these keys
will automatically select this mode.
Macro 67 Current Selected Machine
Macro 104 Machine-A
Macro 105 Machine-B
Macro 106 Machine-C
Macro 107 Machine-D
The keys are mapped automatically to the available tracks per machine as defined above.
The action of the track arm keys is determined by Menu 8 as follows:-
MENU 08:- Record Track Arm
0= Ready, 1= Ready/Record, 2= Record
Track arming keys may operate in one of the following ways:-
0= Ready
Track arming as per multitrack, track arm keys put tracks into ready on or ready of mode. Depressing
the Record key or Record & Play keys will then send the command.
CB ELECTRONICS LTD

9.00 RECORD TRACK MAPPING