Check For Record; Record Command To; Record-In And Record-Out Keys - CB ELECTRONICS SR-3 User Manual

1= System
To the System Record Map, this may be mapped on a track by track basis across all the
machines/tracks in the system.
2= Off
Track arming is ignored, dummy tallies are generated.

7.11 Check for Record

MENU 11:- Check for Record
0= Off 1= On
When Enabled, the system will stop if any record enabled machine is NOT in record after a record
command has been sent.
7.12 Normal: Global Record Command
MENU 12:- Record Command to
0= Selected Group 1= All Enabled
Determines whether record commands are sent to all enabled machines or just to the record enabled
machines in the current selected group
7.12 Xmc: Multiple Record Remotes
MENU 12:- Multiple Record Remotes
0= No 1= Yes
Using the RM-6 with more than one XMC Remotes this parameter allows for different record machines
to be controlled by each remote. Each Remote can select which machines it can record enable and
issue record commands.
note: This feature is provided on a machine basis and not on track basis.
7.13 Record-In & Record-Out Keys
MENU 13:- Rec-In & Rec-Out Keys
0= Mark & Store 1= Off 2= Store
The Function of the [In] and [Out] keys when used without Shift/Store/Recall/Trim active is modified
by this parameter.
0= Mark & Store
Grab the current machine position and store as Record In or Out.
1= Off
No Action.
2= Store
Store the current keyboard display as record In or Out.
CB ELECTRONICS LTD