Chase Command Type; Start Advance; Park Offset - CB ELECTRONICS SR-3 User Manual

7.51 Send Set Generator Command before Crash record
MENU 51:- Crash Rec Set Generator
0= No 1= Yes
7.52 Reset Crash Record after use
MENU 52:- Crash Rec Reset
0= No 1= Yes

7.53 Chase Command Type

MENU 53:- Chase Command Type
0= CMD 1= P 2= PC Video 3= - 4= + 5= -+
Using the Machine's internal Synchroniser
0= CMD
Issue chase command to machine
1= P
Issue Play command to machine
2= PC
Issue Play command to machine, followed by lock once has been achieved
Video Type lockup, use parameters in section 7.027 - 7.031
Using the SR-4 Synchroniser
3= -
Lockup one frame behind and then Accelerate
4= +
Lockup one frame ahead and then Decelerate
5= -+
Lockup from behind or ahead with acceleration or deceleration

7.54 Start Advance

MENU 54:- Start Advance
0= 1= 2= 3= 4= 5= 6= 7= 8= 9= Frames
Only valid when used with Park Offset, to set this parameter select chase type 1, and adjust for 0 or -
1 frame offset from stop to play (Chase type 3), or 0 or 1 frame offset (Chase type 4), +/-1 frame offset
(Chase type 5).

7.55 Park Offset

MENU 55:- Park Offset * 5 Frms
0= 1= 2= 3= 4= 5= 6= 7= 8= 9=
The park offset is not normally used for video machines. A park offset will allow more consistent starts
CB ELECTRONICS LTD
IFACE CHASE