7.14 Default Analogue & Video Record Ready
MENU 14:- Default Record Enable
0= Disable 1= A1-A2 2= A1-A2+V 3=Asmb
When a new video machine is connected to the system the initial setting of its Analogue, Video and
Assemble Enable parameters will be configured dependant on this parameter.
To Insert edit on the timecode or cue tracks (A3, A4), select 3= Asmb
To Enable Crash Record select 3= Asmb
7.15 Default Record Enable
MENU 15:- Default record Enable
0= Off 1= Audio 2= All
Off:
Machines will not be record enabled when connected
Audio: Audio machines when connected will be record enabled, video machines will not
All:
All machines will be record enabled when connected
7.16 Record Disable Transport Keys
MENU 16:- Record Disable Transport Keys
0= No 1= Yes
No: All Transport keys (Blue) are active when in record.
Yes: All transport keys (Blue) other than Stop and Play are disabled when in record.
7.17 Default Chase Type
MENU 17:- Default Chase Type
0= Master Code 1= RS422 only
When a new machine is connected the chase will be configured depending on the machine type.
0= Master Code
Master code available, use the machines internal synchroniser where appropriate.
1= RS422 Only
Master code not available always use the SR/MR synchroniser.
7.18 Wait for Slaves
MENU 18:- Wait For Slaves
0= No 1= Yes
0= No Play the master machine when play key depressed.
1= Yes When the play key is depressed stop the master machine and wait for all slaves to park before
sending a play command to the master machine. This is indicated by the Play LED flashing.
CB ELECTRONICS LTD
UNIT CHASE