Unit Setup; Unit Select Menu; Unit Record; Initial Record Command - CB ELECTRONICS SR-3 User Manual

7.02 Unit Select Menu

MENU 02:- UNIT: Select Menu
0= Rec 1= Chase 2= Code 3= Generic 4=Jog
After selecting 0= Unit from the ROOT menu you then select the set-up section that you wish to look
at and change.
0= Rec Record functions
1= Chase Chase/Synchroniser functions
2= Code Timecode Reader/Generator functions
3= Generic
4= Jog Jog/Shuttle

7.03 Initial Record Command

MENU 03:- Initial Record Command:-
0= RECORD 1= RECORD+PLAY
From play, use either the RECORD key only or both RECORD and PLAY to enter record.
7.04 Check for Lock Status
MENU 04:- Check Lock Status?
0= Yes 1= No
0= Yes Check for system lock before record
1= No No check for system lock before record
7.05 Offset change when Master or Record Enabled
MENU 05:- Master/Rec Enab Offset change
0= Disabled 1= Enabled
0= Disabled Offset change on record enabled machines is disabled.
1= Enabled Offset change on record enabled machines is enabled

7.06 Virtual Record Tally

MENU 06:- Virtual Record Tally
0= Off 1= On
0= Off Record tally is on only if one or more machines are in Record.
1= On Record tally is ON if a record command has been sent or one or more machines are in Record.

7.07 Track Arm Keys

MENU 07:- Track Arm Keys
0=System, 1= Mcn, 2= Enabled 3= Macro
CB ELECTRONICS LTD
UNIT Set-up

UNIT RECORD