Remote Fwd/Rwd Commands To Video Machine - CB ELECTRONICS SR-3 User Manual

1=Rec
GP Output 4 (pin 6): RECORD ON High for one frame at 'Rec Adv' before the record in point.
GP Output 5 (pin 19): RECORD OFF High for one frame at 'Rec Adv' before the record out point.
GP Output 6 (pin 7) : Streamer Trigger High for one frame at a preset time (Nominal 3 seconds,
scratch pad store"Shift-9" is used to set the streamer advance) before the Record In point or before
Scratch pad store "9".
[Recall] or [Store] followed by [Record] will access the Rec Adv memory.
[Recall] or [Store] followed by [Shift] followed by [9] will access the Streamer Advance memory.
2=Tal
GP Outputs 4,5,6 are used with a parallel remote control as encoded tallies.
3=Mcn
GP Outputs 4,5,6 are used as encoded outputs to indicate the current selected Port.
Port A = 000, Port B = 001, Port C = 010, Port D = 011
4=Mas
GP Outputs 4,5,6 are used as encode outputs to indicate the current selected Master Port.
Port A = 000, Port B = 001, Port C = 010, Port D = 011
5=Rdr
GP Outputs 4,5,6 are used as encoded machine control outputs when the Reader is selected. For
example when used with a Telecine.
Stop = 000, Play = 001, Rvs Play = 010, Fast Fwd = 011, Fast Rvs = 100, Rvs Crawl = 101,
Fwd Crawl = 110
6=ADR
GP Output 4 (pin 6): Red Light High during pre-roll and record.
GP Output 5 (pin 19): Beep High for one frame three times at 0.6 second intervals before the record
in point.
GP Output 6 (pin 7) : Streamer Trigger High for one frame at a preset time (Nominal 3 seconds,
scratch pad store"Shift-9" is used to set the streamer advance) before the Record In point or before
Scratch pad store "9".
[Recall] or [Store] followed by [Record] will access the Rec Adv memory.
[Recall] or [Store] followed by [Shift] followed by [9] will access the Streamer Advance memory.
7.34 GP Output 3
MENU 34:- GP Output 3 Mute/Red Light
0= Ply 1= Ply+Rvs 2=Rec 3= ADR 4=Red Light
GP Output 3 may be used as a Mute or Red Light output.
0= Mute PL
Mute except when in Locked Play
1= Mute PL+R
Mute except when in Locked Play or Reverse play
2= Rec Mute
Mute when in record or rehearse.
3= ADR
4= Red Light
Use GP3 as a Red light output, see also Macro No.

7.35 Remote FWD/RWD Commands to Video Machine

CB ELECTRONICS LTD