Husqvarna CR 65 2012 Workshop Manual page 149

6
8
7
10
9
11
FUEL SUPPLY
CR 65 2012
– Loosen the clamp (6) on the filter box connection unions.
– Remove saddle and side panels as described in Section "E".
– Disconnect the silencer from the rear chassis supporting plate.
– Remove the two lower screws (7) and loosen the two upper screws (8) that
connect the rear chassis to the front chassis.
– Turn the rear chassis (9) to completely release the carburettor from the union
(10) that connects the air filter.
– Loosen the tie (11) and remove the carburettor from the intake fitting.
S.7
Workshop Manual Ed. 09-2011