Husqvarna CR 65 2012 Workshop Manual page 167

3
CHASSIS AND WHEELS
CR 65 2012
Removing the front wheel
Set a stand under the engine and see that the front wheel is lifted from the
ground.
Loosen the screw (1) placed on the left side;
1
Loosen the two screws (2) that fasten the pin head to the fork bottom on the
right side;
Slide the pin (3) out from the right side and remove the wheel having care to
recover the two spacers (one for each side).
2
Do not operate the front brake lever when the wheel has been
removed; this causes the calliper pistons to move outwards.
After removal, lay down the wheel with brake disc on top.
Y.5
Workshop Manual Ed. 09-2011