Saddle Removal; Side Panel Removal - Husqvarna CR 65 2012 Workshop Manual

1
2
2
1
3
4
3
GENERAL PROCEDURES
CR 65 2012

Saddle removal

- Turn the rear pin (1) counterclockwise.
- Release the saddle (2) from the front retaining screw pin.

Side panel removal

- Remove the saddle as described in the relevant paragraph.
- To remove the side panels of the vehicle it is necessary to first remove the
plastic cover (1) of the air box, loosening the rear chassis retaining screw
(2).
- Loosen the five retaining screws (3) and remove the left side panel (4).
- Proceed in the same way to remove the right side panel.
3
E.5
Workshop Manual Ed. 09-2011