Air Filter Cleaning And Check - Husqvarna CR 65 2012 Workshop Manual

2
3
4
SETTINGS AND ADJUSTMENTS
CR 65 2012
Air filter check and cleaning
- Remove the saddle as outlined in the relevant paragraph.
- Remove the plastic cover (1) by loosening the rear chassis retaining screw
(2). Release the spring (3) to remove the air filter (4).
1
4
- Clean the filter (4) with suitable products, then soak it in the specific oil.
- Use a cloth to clean the filter box internal side (5).
- Reassemble all parts, in the reverse order compared to disassembly.
Never tamper the filter box cover: we strongly recommend not to remove
the material delimited by the cut to increase the air flow because this
would lead to a drastic decrease of performances at low and medium
rpm, against a very little improvement at high rpm; furthermore the cover
protects the filter against water, mud and dirt.
5
We recommend keeping a spare filter.
D.13
Workshop Manual Ed. 09-2011