Upload Configuration; Upload Log; Ping Test - D-Link DGS-3324SR User Manual

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Figure 7- 2. Download Configuration
Enter the IP address of the TFTP server and specify the location of the switch configuration file on the TFTP
server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.

Upload Configuration

To upload the switch settings to a TFTP server, click on the TFTP Service folder in the Maintenance folder and
then click the Save Settings link:
Figure 7- 3. Upload Configuration window
Enter the IP address of the TFTP server and the path and filename for the history log on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.

Upload Log

To upload the switch history log file to a TFTP server, open the TFTP Service folder in the Maintenance folder
and then click the Upload Log link:
Figure 7- 4. Upload History Log window
Enter the IP address of the TFTP server and the path and filename for the history log on the TFTP server.
Click Start to record the IP address of the TFTP server and to initiate the file transfer.

Ping Test

Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then
responds to or echoes the packets sent from the Switch. This is very useful to verify connectivity between the
Switch and other nodes on the network.
176