D-Link DGS-3324SR User Manual page 130

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Configure each IP interface individually using the OSPF Interface Settings – Edit menu. Click the Apply button
when you have entered the settings. The new configuration appears listed in the OSPF Interface Settings table.
To return to the OSPF Interface Settings table, click the
Some OSPF interface settings require previously configured OSPF settings. Read the descriptions below for
OSPF interface setting details.
Parameter
Interface Name
IP Address
Network Medium
Type
Area ID
Router Priority
Figure 4- 73. Edit OSPF Interface Settings menu
Description
Displays the interface name of an IP interface previously configured on the
Switch.
The IP address of the Interface Name, and its current status (Link Up or
Link Down).
A read only field describing the type of network medium used. This field will
only read BROADCAST due to OSPF configurations permanently set in the
Switch.
Allows the entry of an OSPF Area ID configured above.
Allows the entry of a number between 0 and 255 representing the OSPF
priority of the selected area. If a Router Priority of 0 is selected, the switch
cannot be elected as the Designated Router for the network.
Show All OSPF Interface Entries
115
link.