Configure Authenticator - D-Link DGS-3324SR User Manual

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Figure 4- 49. Typical Configuration with 802.1X Fully Implemented
State Machine Name
Port Timers state machine
Authenticator PAE state machine
The Authenticator Key Transmit state machine
Reauthentication Timer state machine
Backend Authentication state machine
Controlled Directions state machine
The Key Receive state machine
Table 4- 3. Conformance to IEEE 802.1X Standards

Configure Authenticator

To display the current 802.1X Authenticator Settings on the Switch, open the Configuration folder, and then
the Port Access Entity folder and finally click on the Configure Authenticator link. This will open the 802.1X
Authenticator Settings page, as shown below.
79