D-Link DGS-3324SR User Manual page 161

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Figure 6- 7. Tx Packets Analysis window (table for Bytes and Packets)
The following fields may be set or viewed:
Parameter
Time Interval [1s ]
Record Number
[200]
Bytes
Packets
Show/Hide
Clear
View Table
View Line Chart
Description
Select the desired setting between 1s and 60s, where "s" stands for
seconds. The default value is one second.
Select number of times the Switch will be polled between 20 and 200. The
default value is 20.
Counts the number of bytes successfully sent from the port.
Counts the number of packets successfully sent on the port.
Check whether or not to display Bytes and Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line
graph.
Clicking this button instructs the Switch to display a line graph rather than a
table.
146