D-Link DGS-3324SR User Manual page 90

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Destination IP
Dscp(0-63)
Protocol
To view the settings of a previously correctly configured rule, click
following screen:
To configure the Access Rule for Ethernet, open the Access Profile Table (figure 4-36) and click Modify for an
Ethernet entry. This will open the following screen:
Destination IP Address- Enter an IP Address mask for the destination IP
address.
This field allows the user to enter a Dscp value in the space provided,
which will instruct the Switch to examine the DiffServ Code part of each
packet header and use this as the, or part of the criterion for forwarding.
The user may choose a value between 0 and 63.
This field allows the user to modify the protocol used to configure the
Access Rule Table, depending on which protocol the user has chosen in
the Access Profile Table. In the example above IGMP is the protocol
chosen and therefore the user may modify the IGMP settings for this
access profile.
Figure 4- 43. Access Rule Display window (IP)
Figure 4- 44. Access Rule Table
in the Access Rule Table to view the
75