D-Link DGS-3324SR User Manual page 159

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Figure 6- 5. Rx Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets)
The following fields may be set or viewed:
Parameter
Time Interval [1s ]
Record Number
[200]
Unicast
Multicast
Broadcast
Show/Hide
Clear
View Table
View Line Chart
Description
Select the desired setting between 1s and 60s, where "s" stands for
seconds. The default value is one second.
Select number of times the Switch will be polled between 20 and 200. The
default value is 20.
Counts the total number of good packets that were received by a unicast
address.
Counts the total number of good packets that were received by a multicast
address.
Counts the total number of good packets that were received by a broadcast
address.
Check whether or not to display Multicast, Broadcast, and Unicast Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line
graph.
Clicking this button instructs the Switch to display a line graph rather than a
table.
144