D-Link DGS-3324SR User Manual page 82

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
The following parameters can set or are displayed:
Parameter
System Boot Time
Time Source
SNTP State
SNTP Primary
Server
SNTP Secondary
Server
SNTP Poll Interval in
Seconds
Year
Month
Day
Time in HH MM SS
Figure 4- 36. Time Settings Page
Description
Displays the time when the Switch was initially started for this session.
Displays the time source for the system.
Use this pull-down menu to Enable or Disable SNTP.
This is the primary server the SNTP information will be taken from.
This is the secondary server the SNTP information will be taken from.
This is the interval, in seconds, between requests for updated SNTP
information.
Enter the current year, if you want to update the system clock.
Enter the current month, if you would like to update the system clock.
Enter the current day, if you would like to update the system clock.
Enter the current time in hours, minutes and seconds if you would like
to update the system clock.
67