D-Link DGS-3324SR User Manual page 143

High-density layer 3 stackable gigabit ethernet switch
Hide thumbs Also See for DGS-3324SR:
Table of Contents

Advertisement

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Parameter
Interface Name
IP Address
Hello Interval(1-
18724 sec) <30>
Join/Prune
Interval(1-18724 sec)
<60>
State <Disabled>
Click Apply to implement the changes on the Switch.
Description
Allows the entry of the name of the IP interface for which PIM-DM is to be
configured. This must be a previously defined IP interface.
Displays the IP address for the IP interface named above.
This field allows an entry of between 1 and 18724 seconds and determines
the interval between sending Hello packets to other routers on the network.
The default is 30 seconds.
This field allows an entry of between 1 and 18724 seconds. This interval
also determines the time interval the router uses to automatically remove
prune information from a branch of a multicast delivery tree and begin to
flood multicast messages to all branches of that delivery tree. These two
actions are equivalent. The default is 60 seconds.
This field can be toggled between Enabled and Disabled using the pull-
down menu, and is used to enable or disable PIM-DM for the IP interface.
The default is Disabled.
128

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents