D-Link DGS-3324SR User Manual page 80

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
The parameters configured for adding and editing System Log Server settings are the same. See the table below
for a description.
The following parameters can be set:
Parameter
Index
Server IP
Severity
Facility
Figure 4- 35. System Log Servers − Add
Description
Syslog server settings index (1-4).
The IP address of the Syslog server.
This drop-down menu allows you to select the level of messages that will
be sent. The options are Warning, Informational, and All.
Some of the operating system daemons and processes have been
assigned Facility values. Processes and daemons that have not been
explicitly assigned a Facility may use any of the "local use" facilities or they
may use the "user-level" Facility. Those Facilities that have been
designated are shown in the following: Bold font means the facility values
that the switch currently now.
Numerical Facility
Code
0 kernel messages
1 user-level messages
2 mail system
3 system daemons
4 security/authorization messages
5 messages generated internally by syslog line printer subsystem
7 network news subsystem
8 UUCP subsystem
9 clock daemon
10 security/authorization messages
11 FTP daemon
65