The System Log Server - D-Link DGS-3324SR User Manual

High-density layer 3 stackable gigabit ethernet switch
Hide thumbs Also See for DGS-3324SR:
Table of Contents

Advertisement

D-Link DGS-3324SR Layer 3 Stackable Gigabit Ethernet Switch
Click on the Setup button to open the Setup Forwarding ports page, as shown below.
Figure 4- 33. Setup Forwarding Ports window
This page allows you to determine which port on a given switch in a switch stack will be allowed to forward
packets to other ports on that switch.
Configuring traffic segmentation on the DGS-3324SR is accomplished in two parts. First you specify a switch
from a switch stack, and then a port from that switch. Then you specify a second switch from the switch stack,
and then you select which ports (or different ports on the same switch,) on that switch that you want to be able to
receive packets from the switch and port you specified in the first part.
In the example above, the switch is Unit 1 and port 1 is selected as the transmitting port. Ports 1-3, 5-7 and 9-24
are selected as being able to receive packets from port 1.
Clicking the Apply button will enter the combination of transmitting port and allowed receiving ports into the
Switch's Traffic Segmentation table.
The Unit drop-down menu at the top of the page allows you to select a switch from a switch stack using that
switch's Unit ID. The Port drop-down menu allows you to select a port from that switch. This is the port that
will be transmitting packets.
The Unit drop-down menu under the Setup Forwarding ports heading allows you to select a switch from a switch
stack using that switch's Unit ID. The Forward Port click boxes allow you to select which of the ports on the
selected switch will be able to forward packets. These are the ports that will be allowed to receive packets from
the port specified above.
Click Apply to enter the settings into the Switch's Traffic Segmentation table.

The System Log Server

The Switch can send Syslog messages to up to four designated servers using the System Log Server. In the
Configuration folder click System Log Server, to view the screen shown below.
Figure 4- 34. System Log Server window
64

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents